Choose a Twintec Location
Current Location: Twintec USA US
Design . Build . Guarantee
With extensive experience over many years, Twintec has defined quality control procedures for all stages of production:
The delivery of Twintec products relies upon properly specified raw materials, proven production methods, experienced personnel and specially adapted equipment and tools.
Twintec develops and builds machinery in-house to satisfy high performance requirements.
Twintec carries out the final regulating layer using laser controlled equipment.
This provides very accurate tolerances (+/- 5mm) and creates the platform for the floor slab casting process.
Twintec uses steel armoured joints that have been selected for their heavy duty load transfer systems, durability and low maintenance costs. For the best effectiveness, these joints are installed at the perimeter of each day’s work and located in low traffic zones.
Twintec’s advanced steel fiber integration process is operated by experienced and trained staff using specially designed fiber integration machines. This process guarantees that the fibers will be uniformly dispersed into the concrete.
By using a laserscreed machine and efficient flood pour techniques Twintec can level large areas of concrete in one day.
Typically an area of 2500m2 can be levelled while still maintaining the highest quality standards.
Dry-shake topping, a coarse blend of aggregates and cement, is mechanically applied just after the concrete has been poured and initially levelled. This suppresses fibres at the floor slab’s surface as well as improving abrasion resistance.
Highly skilled workers powerfloat finish the floor slab. For high tolerance floor slabs, Twintec’s experienced finishing team flatten and densify the surface. With this step, the highest flatness tolerances are achieved with no remedial grinding.
Browse the videos below to see our processes and technology in action
From the earliest concept planning stage of your project, Twintec can provide consultative information to assist with preliminary design and budget planning.